other
Products
Home

Melamine Preheater Machine

HF Melamine Preheating Equipment

HF Melamine Preheating Equipment

Shunhao Brand 3KW, 5KW, 10KW melamine preheating machines available

  • Brand:

    Shunhao
  • item no.:

    10 KW
  • Payment:

    LC, TT
  • product origin:

    China
  • Color:

    Green
  • shipping port:

    Xiamen
  • Machine Dimension:

    1150×820×1720
  • Machine Weight:

    600KG
  • Trainning Service:

    Yes
  • Support Service:

    Life-time Service
  • Product Detail

Advantages of Shunhao Melamine Preheating Machine:

1. Easy to operate, and electric saving

2. Top brand parts used: Canon tube,Japan Toshiba, Omron, etc

3. Hard quality & 1-year warranty

4. Strong wooden box packing and safe deliver

5. China High quality preheaters supplier

Shunhao melamine preheating machine


Technical Parameters

No

Content.

HGY-1020

1

Output10

KW

2

Power Source

3Φ220V

380V

415V

3

Power Input

20KVA

4

Oscillation Frequency

27MHZ

5

Vacuum Tube

8T85RB


6

Voltage Switching

3-stage

7

Preheating Power

110℃ Within 60 secs

8

Phenolic Resin

6500gr

9

Melamine Moulding Compound

6000gr

10

Urea Moulding Compound

6000gr

■ PS: Specifications subject to change without notice.


melamine powder preheating machine


How to maintain the HF preheating machine?

  1. In the process of use, the air gun is often used to clean up the dust and debris in the working room.
  2. Regularly (at least once a month) use an air gun to remove dust and impurities in the oscillation chamber, working room, and lower cabinet.
  3. Regularly (at least once a month) wipe the electrode rollers and edge plates in the working chamber with volatile solvents (such as toluene).
  4. Regularly (at least once a week) check the four weeks of the upper cover Whether the contact between the phosphor bronze sheet and the yellow angle steel is good, if there is blackening or Oxidation should be polished in time.
  5. Regularly (at least once a week) check whether the position of the connecting rod flywheel is deviated. Under normal conditions: when the upper cover is closed, the flywheel hole is directly above: when the upper cover is opened, the flywheel hole is directly below. If it deviates, please adjust the corresponding micro switch in the chassis in time.
  6. Regularly (depending on site conditions at least once a week or a month) clean the air inlet filter of the whole machine.
  7. After the power is turned on every day, turn off the "high voltage", and the machine runs a cycle of working procedures without load before entering work.


Leave A Message

New molds or machines inquiry or other service
related products
Melamine Compound Preheater Machine
High Frequency Preheater Machine
1. Widely used in bakelite; Preheat electrical parts and melamine molding 2. Widely used in semiconductor IC; The charger; Forming of electronic devices
Melamine Compound Preheater Machine
Melamine Dinnerware Preheater Machine
It's widely used in bakelite; Preheat electrical parts and melamine molding.
Melamine Ware Preheater Machine
Melamine Powder Preheating Machine
1. Widely used in preheating the raw material before melamine molding 2. Preheating can increase the melamine product yield
Melamine Ware Preheater Machine
Melamine Powder Preheating Machine
1. used in preheating melamine powder before molding. 2. Preheating can increase the melamine product output.
Melamine Ware Preheating Machine
High Frequency Preheating Machine
1. 18 years experience in melamine making machines and moulds 2. High frequency preheating machine for melamine powder
Melamine Ware Preheater Machine
High Frequency Melamine Powder Preheater Machine
1. Widely used in preheating the raw material before melamine molding 2. Preheating can increase the melamine product yield
Melamine heating Machine
Melamine Compound Heating Machine
1. 18 years experience in melamine making machines and moulds 2. Japan advanced technology supported
Melamine Powder Preheating Machine
10 KW Melamine Preheating Machine
1. Function: Preheating the raw material powder into cake for a high yield product 2. 10KW preheating machine is used for big pressure of melamine molding machine, from 300tons -800tons, powder capacity upto 6000 grams
Leave A Message
Leave A Message
New molds or machines inquiry or other service

Home

Products

about

contact