Tel :
86-15905996312Email :
machine@hongancn.com
Tel :
86-15905996312Email :
machine@hongancn.com
1. Function: Preheating the raw material powder into cake for a high yield product
2. 10KW preheating machine is used for big pressure of melamine molding machine, from 300tons -800tons, powder capacity upto 6000 grams
Brand:
Shunhaoitem no.:
10 KWPayment:
LC, TTproduct origin:
ChinaColor:
Greenshipping port:
XiamenMachine Dimension:
1150×820×1720Machine Weight:
600KGTrainning Service:
YesSupport Service:
Life-time ServiceFunction of 10KW Preheating Machine
Advantages of Shunhao Preheating Machine:
1. Shunhao machine is electric saving.
2. Use the top brand part: Canon tube
3. Good quality and famous brands of parts: Japan Toshiba, Omron, etc.
4. Vacuum tubes, relays, capacitors, resistors, coopers, all available.
5. Hard quality & 1-year warranty
6. Strong wooden box packing and safe deliver
7. Top brand of preheaters supplier in China
How to Install the Preheating Machine?
Shunhao not only produces good quality melamine machines but also supplie the best after-sales service.
The video above can clearly show you how to install the Canon Tube back into the preheating machine.
Installation Steps:
1.Take out the glass and place the Canon tube back carefully.
2.Connect other wires or coils with their right place tightly.
Technical Parameters
|
No |
Content. |
HGY-1020 |
|
1 |
Output10 |
KW |
|
2 |
Power Source |
3Φ220V 380V 415V |
|
3 |
Power Input |
20KVA |
|
4 |
Oscillation Frequency |
27MHZ |
|
5 |
Vacuum Tube |
8T85RB
|
|
6 |
Voltage Switching |
3-stage |
|
7 |
Preheating Power |
110℃ Within 60 secs |
|
8 |
Phenolic Resin |
6500gr |
|
9 |
Melamine Moulding Compound |
6000gr |
|
10 |
Urea Moulding Compound |
6000gr |
■ PS: Specifications subject to change without notice.
Melamine Preheating Machine Maintenance
1. Use a wind gun to clean the working area regularly.
2. Keep the tube area clean and make the fan clean and smooth
3. Regularly check the operation of the machine, and keep the whole machine clean at least once a week or a month
No.78, Bangtai Road, Qingmeng Zone, Quanzhou, Fujian, China
Email : machine@hongancn.com
Different models of machines available and different surface or texture of molds can be made from Shunhao Factory. Rich experience since 2002 will reduce the error-cost when you running your tableware factories.
Copyright © 2024 Quanzhou Shunhao Melamine Moulds Co.,Ltd. All Rights Reserved.
Blog
ipv6 network supported
