Tel :
86-15905996312Email :
machine@hongancn.comShunhao Factory high frequency preheating machines: Canon Tube
Brand:
Shunhaoitem no.:
10 KWPayment:
LC, TTproduct origin:
ChinaColor:
Greenshipping port:
XiamenMachine Dimension:
1150×820×1720Machine Weight:
600KGTrainning Service:
YesSupport Service:
Life-time ServiceHigh Frequency Preheating Machine
Introduction
The primary utilization of this device is for the initial heating treatment of thermo-set resin materials, including melamine, bakelite, and urea plastic. It is particularly useful for various preformed projects such as compressed molding, transfer molding, and extrusion molding.
Material
The device is compatible with a range of materials such as phenolic resin, urea, plastic, melamine, epoxy resin, and thermosetting molding compound.
Function
By subjecting the material to high-frequency heating using the machine, it enhances the fluidity of the material, reduces casting time, eliminates material stress, removes visible water lines, and enhances the cleanliness of the finished product. Additionally, it facilitates material conservation, and prolongs the lifespan of the die.
Technical Parameters
No |
Content. |
HGY-1020 |
1 |
Output10 |
KW |
2 |
Power Source |
3Φ220V 380V 415V |
3 |
Power Input |
20KVA |
4 |
Oscillation Frequency |
27MHZ |
5 |
Vacuum Tube |
8T85RB
|
6 |
Voltage Switching |
3-stage |
7 |
Preheating Power |
110℃ Within 60 secs |
8 |
Phenolic Resin |
6500gr |
9 |
Melamine Moulding Compound |
6000gr |
10 |
Urea Moulding Compound |
6000gr |
■ PS: Specifications subject to change without notice.
Frequently Asked Questions about the HF MMC Preheating Machine
How can I inquire about the machine?
To inquire about the machine, you can either send an email to machine@hongancn.com or contact us directly by phone. You can reach us at +86 15905996312.
Where is your factory located?
Our factory, Shunhao Machine and Mould Factory, is situated in Quanzhou, Fujian Province, China.
What are the payment terms?
The payment terms require a 30% deposit via TT (Telegraphic Transfer) in advance, and the remaining 70% is to be paid by TT after inspection but before shipment.
What is the packaging method for the HF preheating machine?
The preheating machine is carefully packaged in a sealed wooden box, ensuring 100% protection against moisture and collisions. It can be shipped using either FCL (Full Container Load) or LCL (Less than Container Load) for both sea and air transportation.
What is the estimated delivery time for the machine?
The delivery time for the machine is typically between 20 to 50 days after receiving the deposit. The specific duration depends on the quantity and model of the machine ordered.