The maintenance of compression mold can greatly extend the service life of the mold. After the new-made melamine press mold arrives at the tableware factory, white wax can be used to clean the mold to reduce product jams on the mold and reduce the occurrence of defective products. Look at the video“What is the White Wax Using for Melamine Moulds？” to get a clear idea.

During normal production, it is usually necessary to check the surface of the mold regularly. During the curing process, all molds will be slightly affected by heat. Excess flashes and some dust powder will accumulate on the mold, and an air gun can be used to blow the debris out of the mold surface. If there is no air gun, please wipe it carefully with a soft cloth.

Mold Storage

You can store the mold with the cavity face down to prevent dust from accumulating in the mold.

In all, the correct storage and maintenance procedures should be , then the mold will have a longer use, and the rejection rate of the product will be minimized.

This is a beneficial experience shared by Shunhao Moulds Factory, which is convenient for customers to improve the utilization rate of melamine tableware moulds.

If you have other questions about melamine crockery molds, please call for a consultation. Tel: +86 15905996312