Nov 17, 2020

How to install the 2 colors melamine molds? 1. Put the one-color male mold directly in the female mold and the two-color male mold on the top 2. Push the forklift onto the machine by hand and then straighten the mold 3. Press to quickly rise to the 2/3 position, Press pause, and then slowly rise to the top, lock the two-color male mold and the female mold 4. Return back the mold 5. select the two-color transfer mold, move the two-color male mold to the left 6. Press to quickly rise to the 2/3 position, press pause, and then press slowly to rise to the top, lock the male mold of one color, so that the work is completed 7. Press the mold of two colors to move the male mold of one color To the right 8. Press to quickly rise to the 2/3 position, press pause, and then press slowly to rise. At this time, pay attention to whether the positions of the guide post and the guide sleeve are aligned. 9. Check whether all the nuts are locked. Key Point: pay special attention to watching whether the guide post and the guide sleeve hole are aligned when installing the 2-color male mold. If it is not aligned, manually correct the alignment. Otherwise, the mold will be crushed directly.

Nov 17, 2020

The box using for preheater machine could not be normal plastic box or melamine box. It should be the special box. If you have questions about this special container to use in the melamine preheater machine, you can call us for the detailed information.

Nov 13, 2020

Preheater machine is important to cook the melamine powder into cake. 1. Melamine powder cooking time: 40-80 seconds. 2. The melamine powder cake could not be too hard or too soft. 3. Box using for preheater machine could not be normal plastic or melamine box. The special box is using for preheater machine. Important: clean the preheater after running especially keep the tube area clean; Keep the fan clean and smooth.

Nov 13, 2020

Shunhao Machinery Factory with 20 years of melamine experience Advantages of fully automatic cutting machine for melamine decal paper 1. Fully automatic & Labour saving 2. No need the cutting knives 3. Accuracy up to 1mm

Nov 12, 2020

Why is the manufacturing cost of your melamine tableware higher than other melamine tableware factories? In addition to the price and quality of melamine powder, the use of machines and molds should also be considered. A fast, good and fast-growing melamine tableware factory cannot do without the cooperation of qualified and experienced mold factory. Shunhao Factory is such a professional manufacturer 1. Shunhao Mould Factory will perform 100% molds testing before leaving the factory to ensure that the moulds can be used normally in the tableware factory. 2. Shunhao Mould Factory also teaches how to use new moulds correctly, which saves tableware factories' time to adapt to moulds and improves production efficiency.

Nov 12, 2020

The key part of the preheater produced by Shunhao Factory uses Canon Tube which is the well-known brand （always maintain quality）! Each test tube has its import code outside of its packaging.

Nov 12, 2020

Why do large tableware factories prefer to use Shunhao Moulds? 1. Design two-color melamine tableware mold, design reasonable drawings, and mold structure. 2. Experienced discussion: save delivery time 3. Perform final mold test and send trial samples to buyers: final confirmation before shipment.

Nov 12, 2020

Why do we need to use preheater to make melamine tableware? 1. The preheating function is to move the moisture from the melamine powder 2. SAVE time to cure in the melamine pressing molding machine Shunhao melamine molding machine is Electric-saving.