How to install the 2 colors melamine molds?

1. Put the one-color male mold directly in the female mold and the two-color male mold on the top

2. Push the forklift onto the machine by hand and then straighten the mold

3. Press to quickly rise to the 2/3 position, Press pause, and then slowly rise to the top, lock the two-color male mold and the female mold

4. Return back the mold

5. select the two-color transfer mold, move the two-color male mold to the left

6. Press to quickly rise to the 2/3 position, press pause, and then press slowly to rise to the top, lock the male mold of one color, so that the work is completed

7. Press the mold of two colors to move the male mold of one color To the right

8. Press to quickly rise to the 2/3 position, press pause, and then press slowly to rise.

At this time, pay attention to whether the positions of the guide post and the guide sleeve are aligned.

9. Check whether all the nuts are locked.

Key Point: pay special attention to watching whether the guide post and the guide sleeve hole are aligned when installing the 2-color male mold. If it is not aligned, manually correct the alignment. Otherwise, the mold will be crushed directly.