Jun 11, 2020

This video will show you how to put on the decal paper on the surface of the melamine tableware and the effect after glazing. The decal paper design is diverse, and even some factories are very good at melamine tableware decal paper design. The introduction and usage of melamine decal paper, please visit What is Decal Paper and How to Use? for details.

Jun 10, 2020

Equipment: 300 tons melamine molding machine, 6 cavities of mold, 5kw / 10kw preheater Raw Material: melamine powder Production Steps： 1. Preheat the powder. 2. Put the preheated powder in the mold. 3. Press the molding machine to automatically close the mold. 4. Put the glazing powder in to make it brighter. 5. Clean the mold with an air gun.

Jun 09, 2020

The good performance of the melamine moulding machine is required to adjust its parameters accordingly. The molding machine by Shunhao Company can help to improve the production capacity and save cost.

Jun 03, 2020

Difficult melamine molds produced at Shunhao factory. We have a professional team for design, production and testing. In the end, the mold can pass the test well and can work successfully in the melamine crockery factory!

Jun 02, 2020

This is a difficult task for producing melamine crockery with two sides of decal paper of shiny powder. This requires: 1. Special mold structure. 2. The PLC procedure of melamine molding machine is correct. 3. Experienced production engineer.

May 09, 2020

Two colors of melamine tableware 1. Normal two colors: The outer color and the inner color are the same thickness. 2. Color Border: A full range of bowls, plates, cups, mugs. 3. Normal two colors with flat border: new style. 4. The internal color is less than the outer color.

May 07, 2020

This video shows how to install the melamine cup mold correctly and safely. Make sure 4 pins are locked on 4 sides to safely secure the mold's punches and cavity. Melamine molds are made of steel and are very strong. In order to ensure mold safety, clamps are required to have a high quality.

May 07, 2020

The installation of melamine crockery mold  1. Use the lift to feed the mold into the machine plate and place it correctly. 2. Use of standard clamp and gaskets (safety requirements for strict quality control) 3. Lock the 2 plates of the mold correctly and firmly to the 2 plates of the machine. 4. The height of the mold and the height of the machine needs to be checked.