Mar 30, 2023

Shunhao Factory is a professional manufacturer of melamine machines and moulds. Shunhao has served more than 100 tableware factories to help customers develop better. On March 29, the Shunhao Factory successfully arranged the delivery. This time, the customer ordered 1 melamine tableware forming machine ( custom color), 4 high-frequency preheating machines and several boxes of melamine tableware flower paper. This shipment was very smooth and successful. Purchasing hotline: +86 15905996312 (Ms.Shelly) E-mail: machine@hongancn.com

Mar 23, 2023

According to the data shared by Shunhao Machine and Mould Factory, the raw material for making melamine tableware moulds---stainless steel continued to drop slightly this week. As of March 17, the daily average price of the spot 304/2B stainless steel flat plate was 14,900 yuan/ton (approximately US$2,183/ton), down 1.6% from 15,142.86 yuan/ton at the beginning of the week, and down 18.798% year-on-year. According to the data, the price trend of nickel and stainless steel is basically the same. Recently, the price of stainless steel and nickel has been falling continuously. This week's stainless steel inventory totaled 1.352 million tons, an increase of 0.14% from last week, of which cold-rolled inventories fell and hot-rolled inventories rose. On the supply side, in February 2023, the output of 300-series crude steel of 41 domestic stainless steel plants with new caliber in China was 1.4831 million tons, an increase of 8.6% month-on-month and a year-on-year increase of 15.4%; An increase of 2.8%. However, recently, rolling coils have continued to lose money, and many steel mills have reported that they have stopped production for maintenance. On the demand side, after the steel price fell, the warehouse receipt resources were digested quickly, but the overall demand was light, and the transmission from the trade link to the terminal was not smooth. The domestic economy is marginally recovering, and terminal consumption has recovered slightly. It is expected that stainless steel will still operate weakly in the short term.

Mar 17, 2023

Exhibition time: June 21-23, 2023 Venue: Nagoya Exhibition Hall, Japan Exhibition cycle: twice a year Sponsor: Japan Mold Industry Association Introduction to the exhibition: INTERMOLD – Japan International Mold Exhibition, hosted by the Japan Mold Industry Association, and strongly supported by the Japanese Ministry of Economy, Trade and Industry, Ministry of Foreign Affairs, Tokyo City Government, Tokyo Chamber of Commerce and Industry, Japan External Trade Organization and other institutions. Range of exhibition: 1. Mold manufacturing and processing: precision molds, plastic molds, metal molds, die-casting molds, stamping molds, injection molding, injection molds, mold accessories, parts, mold materials, precision machining tools, mold making and prototypes, rapid prototyping, progressive mold, hot runner, heat treatment, mold surface treatment, mold production and processing consulting, mold CAD/CAE/CAM software; 2. Mold materials and components: brushing machine, mold and mold parts, steel mold, steel mold punching and drilling, complete set of punching mold, finale mold, thimble, graphite electrode material, graphite material, injection, mold base, pillar, plastic mold, electric power metallurgy Molds, Die Casting Molds, Steel Products, Work Fixtures 3. Metal stamping technology: stamping forming machines, servo presses, multi-station press machines, forging presses, forming machinery parts and tools 4. Tools: Measuring and cutting tools, forming tools, knives, abrasive tools, molds and accessories, fixtures, etc. 5. Detection technology and equipment: measurement and detection technology and equipment, image data processing technology, quality control technology and software, computer-aided design, etc. 6. 3D printing and additive manufacturing: industrial 3D printers, rapid prototyping, 3D scanners, 3D printing services, etc. 7. Others: flexible processing, installation technology, operation technology, automation equipment, industrial robots, welding equipment, precision instruments, laser and water jet cutting processing equipment, etc.

Mar 10, 2023

On March 9, 2023, Shunhao Machine and Mold Factory successfully and safely delivered a 300-ton melamine tableware making machine and some new design melamine moulds ordered by the cooperative tableware factory. Shunhao molding machines have passed the 48-hour high pressure test, and are carefully packaged before being sent to the customer's factory to ensure that they can be put into production quickly. Melamine tableware production equipment one-stop service contact information Mobile: +86 15905996312 (Shelly Chen) E-mail: machine@hongancn.com

Mar 02, 2023

Shunhao Machine and Mold Factory selects high-quality stainless steel materials for melamine tableware molds making, which are durable and have a high rate of finished products. The following is the latest stainless steel market trend to share with you. The price of stainless steel fluctuated and fell back in February. On February 1, the price of stainless steel was 15,900 yuan/ton (about 2,313 US dollars/ton), and on February 28, the price of stainless steel fell to 15,528.57 yuan/ton (about 2,259 US dollars/ton), an overall decrease of 2.34%, a year-on-year increase of 5.16 %. Except for nickel, the upstream prices of stainless steel have all risen, but affected by the cost reduction of steel mills, the price of stainless steel is relatively firm. As of the end of the month, the total stainless steel inventory was 1.4106 million tons. Shunhao Factory predicts that the price of stainless steel will be weak in the short term, but with the arrival of the peak season in March, terminal demand may improve to a certain extent, and the price of stainless steel may rise slightly by then.

Feb 09, 2023

Two days ago, Shunhao Machine and Mold Factory delivered a batch of machines and molds safely. The customer of this factory, which has been cooperating for many years, purchased a 200-ton melamine ware compression machine, 3 sets of new tableware compression molds (the molds have been tested, and the tableware samples have been confirmed by the customer) and 1 high-frequency preheater. Shunhao Factory specializes in manufacturing high-quality machines and molds required for the production of melamine tableware, and also helps customers customize other supporting equipment to save customers' communication costs and consumption costs. Shunhao has provided services for more than 100 factories at home and abroad. Please contact us for cooperation. Mobile: +86 15905996312 (Ms. Shelly) E-mail: machine@hongancn.com

Feb 03, 2023

The 17th Beijing International Mould Exhibition 2023 Time: July.5th~7th, 2023 Holding Cycle: Once a year Venue: China International Exhibition Center (Jinganzhuang Pavilion) Address of the Exhibition Hall: No. 6, North Third Ring East Road, Chaoyang District, Beijing 100028 Exhibition Introduction Beijing International Mold Industry Exhibition (AIMI EXPO) covers the whole field of mold manufacturing industry, including the whole field of mold intelligent manufacturing. It provides solutions that keep pace with the times for China's rapidly growing and increasingly sophisticated mold manufacturing industry and is an ideal trading platform for exploring the huge Chinese market. Exhibition Scope Metal cutting precision machine tool and non-traditional processing machine tool Mould & forming technology, materials and mould product Punching machine and plastic machinery Internet + CAD/CAM/CAE integrated and information management technology Automation integration technology and equipment, robot 3D additive manufacturing & Laser processing P.S. Shunhao Moulds Factory is a professional manufacturer of melamine and urea molds. Welcome to contact us for developing new molds or new designs. Cell Phone: +86 15905996312 (Ms.Shelly)  Email: machine@hongancn.com

Jan 19, 2023

On January 17, Shunhao Machine and Mould Factory successfully delivered 200 tons melamine forming machine and three-station melamine edge polishing machine. These automatic machines are very helpful for the development of customers' factories. Shunhao Factory has served more than 100 factories, not only providing high-quality products and professional services, but also becoming loyal friends with customers. Thank you for customers' trust and support.